Potable or Drinking Water Treatment by b r a n o ©®

DOMESTIC WATER FILTERS (for home/office)

Reverse Osmosis (RO) is not new on the market. This technology has been used for decades to purify seawater into drinking water. This RO for home and/or for office is developed to meet the growing challenges facing our drinking water. This unit is still designed around a semi-permeable membrane that allows only pure water, oxygen and a small amount of minerals to pass through, while sending everything else down the drain. When combined with the purifying abilities of activated carbon, reverse osmosis is a proven method for making great-tasting, high quality drinking water for your family.

QUACRO4 Reverse Osmosis system has 4 stage domestic treatment. It removes 98% of all contaminants from your water and 99+% of all bacteria. The system comprises of a sediment pre filter a carbon pre filter the reverse osmosis membrane a 2 gallon storage reservoir and a post carbon filter.

BUY Domestic Water Filter QUACRO4 Reverse Osmosis

Stage 1 - 5 Micron Sediment Pre Filter - Extracts the larger contaminants from the water including dust, dirt, sand, rust particles and grit where present.
Stage 2 - 10 Micron Carbon Block Pre Filter - Extracts most of the chlorine and organic chemicals providing enhanced reduction of taste, odour, and colour. Extracts most of the chlorine and organic chemicals providing enhanced reduction of taste, odour, and colour.
Stage 3 - Reverse Osmosis Membrane - Made from a thin film composite (TFC) high quality membrane that is capable of removing 98% of all contaminants from your water 99+% of all bacteria. Made from a thin film composite (TFC) high quality membrane that is capable of removing 98% of all contaminants from your water 99+% of all bacteria.
Stage 4 - Carbon Post Filter - To help guarantee the taste of water as some tainting may occur within the storage tank.To help guarantee the taste of water as some tainting may occur within the storage tank.

BUY QUACRO4 Reverse Osmosis

The system weighs 11kg Dimensions Main Module - Height: 410mm Width: 340mm Depth: 140mm Dimensions Reservoir - Height: 420mm Width: 280mm Choose from a range of taps suitable for use with this system (available at checkout) Comes with a 1 year manufacturers warranty All specifications are based on pressure of 4.5 bar and 22°C temperature and are dependant on the supply being from the mains not a private water supply. If you intend to source your water from a private supply, or are in any doubt about your water quality we strongly advise you to contact your local water authority.